The width to display the pushpin map, in pixels. Just the number, without "px". If omitted or left empty, defaults to 250.
pushpin_map_caption
Caption to display below the pushpin map. If left blank or omitted, a caption will not be displayed.
pushpin_label_position
The position of the label on the pushpin map relative to the pushpin mark. Valid values are left, right, top and bottom. This defaults to either left or right, depending on the coordinates of the marker and its position relative to the right border of the map image.
location
Insert the venue's location. For "United States" and "United Kingdom", it is preferred that they be abbreviated "U.S." and "UK", but political subdivisions should never be (never "MA" for "Massachusetts", "ON" for "Ontario", etc.). See Notes[1] for details.
coordinates
Insert the geographical coordinates; use {{Coord}}
Insert the date when ground was broken to build the venue
built
Insert a date range of when the venue was under construction
opened
Insert the date of when it opened
renovated
Insert the date of when it was renovated
expanded
Insert the date of when it was expanded
closed
Insert the date of when it was closed
demolished
Insert the date of when it was demolished
owner
Insert the name(s) of the venue's owner(s)
operator
Insert the name(s) of the venue's operator(s)
surface
Enter the surface of the venue (e.g. grass, sand, artificial turf)
scoreboard
Enter the details of any scoreboard at the venue. If specific details are not known, just enter "Yes" if the venue has a scoreboard or "No" if there is none.
screens
Enter the number of theatre screens.
currentuse
Enter the current use of the venue.
production
Enter the theatrical production currently being housed at the venue.
cost
Enter the construction cost, preferably in the currency that the venue is located in (see WP:DATE for details) Per its own documentation, the inflation templatemust not be used.
architect
Insert the name(s) of the venue's architect(s)
builder
Name(s) of the venue's builder(s)
project_manager
Insert the name(s) of the project manager(s) who led the venue's construction
structural engineer
Insert the name(s) of the venue's structural engineer(s)
services engineer
Insert the name(s) of the venue's services engineer(s)
general_contractor
Insert the name(s) of the venue's general contractor(s)
main_contractors
Insert the name(s) of the venue's main contractor(s)
seating_type
soft seat, reserved seating
capacity
Insert the seating capacity of the venue. If it is a multi-purpose venue, use the format:
Capacity (Purpose)
suites
Insert the number of suites
record_attendance
Insert the all-time record attendance of the venue. (include the date and event if you wish) If it is a multi-purpose venue, use the format:
Record Attendance (Date & Event)
dimensions
Insert the dimensions of the venue:
For a football (soccer) pitch size, use the format:
105 × 68 m
For baseball dimensions, use the format:
Left field: 300 ft (91 m) Center field: 400 ft (122 m) Right field: 300 ft (91 m)
field_shape
Oval rectangular or circular
acreage
Insert the acreage.
tenants
Insert the teams and any other parties who use the venue as their home stadium or arena. Use the format:
TeamName (league/organization) year–year
Alternatively, you can use the {{infobox venue/tenantlist}} sub-template to automatically line rows up.
embedded
Embed another infobox with such capability like {{designation list}} and {{infobox NRHP}}. See their respective documentation for more information.
mapframe – Specify yes or no to show or hide the map, overriding the default. Default: no
mapframe-caption – Caption for the map. Default: blank (or if |mapframe-geomask= is set, "Location in geomask's label")
mapframe-custom – Use a custom map instead of the automatic mapframe. Specify either a {{maplink}} template, or another template that generates a mapframe map, or an image name. If used, the subsequent mapframe parameters will be ignored. Default: not specified
mapframe-id or id or qid – Id (Q-number) of Wikidata item to use. Default:item for current page
mapframe-coordinates or mapframe-coord or coordinates or coord – Coordinates to use, instead of any on Wikidata. Use the {{Coord}} template, e.g. |coord={{Coord|12.34|N|56.78|E}}. Default:coordinates from Wikidata
mapframe-wikidata – Set to yes to show shape/line features from the wikidata item, if any, when |coord= is set. Default:not specified
Customise which features are displayed:
mapframe-shape – Turn off display of shape feature by setting to none. Use an inverse shape (geomask) instead of a regular shape by setting to inverse. Default:not specified
mapframe-point – Turn off display of point feature by setting to none. Force point marker to be displayed by setting to on. Default:not specified
mapframe-line – Turn off display of line feature by setting to none. Default:not specified
mapframe-geomask – Wikidata item to use as a geomask (everything outside the boundary is shaded darker). Can either be a specific Wikidata item (Q-number), or a property that specifies the item to use (e.g. P17 for ਦੇਸ਼ (P17), P131 for ਪ੍ਰਸ਼ਾਸਨਿਕ ਵਿਭਾਗ ਵਿੱਚ ਸਥਿਤ (P131)). Default:not specified
mapframe-switcher – set to auto or geomasks or zooms to enable Template:Switcher-style switching between multiple mapframes. Default:not specified
auto – switch geomasks found in ਥਾਂ (P276) and ਪ੍ਰਸ਼ਾਸਨਿਕ ਵਿਭਾਗ ਵਿੱਚ ਸਥਿਤ (P131) statements on the page's Wikidata item, searching recursively. E.g. an item's city, that city's state, and that state's country.
geomasks – switch between the geomasks specified as a comma-separated list of Wikidata items (Q-numbers) in the mapframe-geomask parameter
zooms – switch between "zoomed in"/"zoomed midway"/"zoomed out", where "zoomed in" is the default zoom (with a minimum of 3), "zoomed out" is 1, and "zoomed midway" is the average
Other optional parameters:
mapframe-frame-width or mapframe-width – Frame width. Default: 270
mapframe-frame-height or mapframe-height – Frame height. Default: 200
mapframe-shape-fill – Color used to fill shape features. Default: #606060
mapframe-shape-fill-opacity – Opacity level of shape fill, a number between 0 and 1. Default: 0.5
mapframe-stroke-color or mapframe-stroke-colour – Color of line features, and outlines of shape features. Default: #ff0000
mapframe-stroke-width – Width of line features, and outlines of shape features; default is "5". Default: 5
mapframe-marker – Marker symbol to use for coordinates; see mw:Help:Extension:Kartographer/Icons for options. Default:not specified (i.e. blank)
Can also be set to blank to override any default marker symbol
mapframe-marker-color or mapframe-marker-colour – Background color for the marker. Default: #5E74F3
mapframe-geomask-stroke-color or mapframe-geomask-stroke-colour – Color of outline of geomask shape. Default: #555555
mapframe-geomask-stroke-width – Width of outline of geomask shape. Default: 2
mapframe-geomask-fill – Color used to fill outside geomask features. Default: #606060
mapframe-geomask-fill-opacity – Opacity level of fill outside geomask features, a number between 0 and 1. Default: 0.5
mapframe-zoom – Set the zoom level, from "1" (map of earth) to "18" (maximum zoom in), to be used if the zoom level cannot be determined automatically from object length or area. Default: 10
mapframe-length_km or mapframe-length_mi or mapframe-area_km2 or mapframe-area_mi2 – Determine zoom level by passing in object's length (in kilometres or miles) or area (in square kilometres or square miles). Default:not specified
mapframe-frame-coordinates or mapframe-frame-coord – Alternate latitude and longitude coordinates for initial placement of map, using {{coord}}. Default:derived from item coordinates
Notes
↑As per RfC "Naming countries in infoboxes": When identifying a location, city or region in the United States or United Kingdom, the preferred approach is to use the country abbreviations allowed by , such as "Portsmouth, New Hampshire, U.S." and "Cardiff, Wales, UK", rather than spelling out the full country name. Avoid using abbreviations for states or provinces in all nations. New Hampshire rather than NH, New South Wales rather than NSW, or British Columbia rather than BC (see ). Cities such as New York City and London may be rendered as "New York City, U.S." and "London, UK" or simply "New York City" and "London". Also, these should not be linked when the context makes it clear (see ). If only the country name is included, it may be written out in full.
Microformat
The HTML mark up produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue article across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.
