True anomaly

Part of a series on
Astrodynamics
Orbital mechanics
Orbital elements Apsis Argument of periapsis Eccentricity Inclination Mean anomaly Orbital nodes Semi-major axis True anomaly
Types of two-body orbits by eccentricity Circular orbit Elliptic orbit Transfer orbit (Hohmann transfer orbit Bi-elliptic transfer orbit) Parabolic orbit Hyperbolic orbit Radial orbit Decaying orbit
Equations Dynamical friction Escape velocity Kepler's equation Kepler's laws of planetary motion Orbital period Orbital velocity Surface gravity Specific orbital energy Vis-viva equation
Celestial mechanics
Gravitational influences Barycenter Hill sphere Perturbations Sphere of influence
N-body orbits Lagrangian points (Halo orbits) Lissajous orbits Lyapunov orbits
Engineering and efficiency
Preflight engineering Mass ratio Payload fraction Propellant mass fraction Tsiolkovsky rocket equation
Efficiency measures Gravity assist Oberth effect
Propulsive maneuvers Orbital maneuver Orbit insertion
v t e

In celestial mechanics, true anomaly is an angular parameter that defines the position of a body moving along a Keplerian orbit. It is the angle between the direction of periapsis and the current position of the body, as seen from the main focus of the ellipse (the point around which the object orbits).

The true anomaly is usually denoted by the Greek letters ν or θ, or the Latin letter f, and is usually restricted to the range 0–360° (0–2π rad).

The true anomaly f is one of three angular parameters (anomalies) that can be used to define a position along an orbit, the other two being the eccentric anomaly and the mean anomaly.

For elliptic orbits, the true anomaly ν can be calculated from orbital state vectors as:

${\displaystyle \nu =\arccos {{\mathbf {e} \cdot \mathbf {r} } \over {\mathbf {\left|e\right|} \mathbf {\left|r\right|} }}}$

(if r ⋅ v < 0 then replace ν by 2π − ν)

where:

• v is the orbital velocity vector of the orbiting body,
• e is the eccentricity vector,
• r is the orbital position vector (segment FP in the figure) of the orbiting body.

For circular orbits the true anomaly is undefined, because circular orbits do not have a uniquely determined periapsis. Instead the argument of latitude u is used:

${\displaystyle u=\arccos {{\mathbf {n} \cdot \mathbf {r} } \over {\mathbf {\left|n\right|} \mathbf {\left|r\right|} }}}$

(if r_z < 0 then replace u by 2π − u)

where:

• n is a vector pointing towards the ascending node (i.e. the z-component of n is zero).
• r_z is the z-component of the orbital position vector r

For circular orbits with zero inclination the argument of latitude is also undefined, because there is no uniquely determined line of nodes. One uses the true longitude instead:

${\displaystyle l=\arccos {r_{x} \over {\mathbf {\left|r\right|} }}}$

(if v_x > 0 then replace l by 2π − l)

where:

• r_x is the x-component of the orbital position vector r
• v_x is the x-component of the orbital velocity vector v.

The relation between the true anomaly ν and the eccentric anomaly ${\displaystyle E}$ is:

${\displaystyle \cos {\nu }={{\cos {E}-e} \over {1-e\cos {E}}}}$

or using the sine^[1] and tangent:

${\displaystyle {\begin{aligned}\sin {\nu }&={{{\sqrt {1-e^{2}\,}}\sin {E}} \over {1-e\cos {E}}}\\[4pt]\tan {\nu }={{\sin {\nu }} \over {\cos {\nu }}}&={{{\sqrt {1-e^{2}\,}}\sin {E}} \over {\cos {E}-e}}\end{aligned}}}$

or equivalently:

${\displaystyle \tan {\nu \over 2}={\sqrt {{1+e\,} \over {1-e\,}}}\tan {E \over 2}}$

so

${\displaystyle \nu =2\,\operatorname {arctan} \left(\,{\sqrt {{1+e\,} \over {1-e\,}}}\tan {E \over 2}\,\right)}$

Alternatively, a form of this equation was derived by R. Broucke and P. Cefola^[2] that avoids numerical issues when the arguments are near ${\displaystyle \pm \pi }$, as the two tangents become infinite. Additionally, since ${\displaystyle {\frac {E}{2}}}$ and ${\displaystyle {\frac {\nu }{2}}}$ are always in the same quadrant, there will not be any sign problems.

${\displaystyle \tan {{\frac {1}{2}}(\nu -E)}={\frac {\beta \sin {E}}{1-\beta \cos {E}}}}$ where ${\displaystyle \beta ={\frac {e}{1+{\sqrt {1-e^{2}}}}}}$

so

${\displaystyle \nu =E+2\operatorname {arctan} \left(\,{\frac {\beta \sin {E}}{1-\beta \cos {E}}}\,\right)}$

The true anomaly can be calculated directly from the mean anomaly ${\displaystyle M}$ via a Fourier expansion:^[3]

${\displaystyle \nu =M+2\sum _{k=1}^{\infty }{\frac {1}{k}}\left[\sum _{n=-\infty }^{\infty }J_{n}(-ke)\beta ^{|k+n|}\right]\sin {kM}}$

with Bessel functions ${\displaystyle J_{n}}$ and parameter ${\displaystyle \beta ={\frac {1-{\sqrt {1-e^{2}}}}{e}}}$.

Omitting all terms of order ${\displaystyle e^{4}}$ or higher (indicated by ${\displaystyle \operatorname {\mathcal {O}} \left(e^{4}\right)}$), it can be written as^[3][4][5]

${\displaystyle \nu =M+\left(2e-{\frac {1}{4}}e^{3}\right)\sin {M}+{\frac {5}{4}}e^{2}\sin {2M}+{\frac {13}{12}}e^{3}\sin {3M}+\operatorname {\mathcal {O}} \left(e^{4}\right).}$

Note that for reasons of accuracy this approximation is usually limited to orbits where the eccentricity ${\displaystyle e}$ is small.

The expression ${\displaystyle \nu -M}$ is known as the equation of the center, where more details about the expansion are given.

The radius (distance between the focus of attraction and the orbiting body) is related to the true anomaly by the formula

${\displaystyle r(t)=a\,{1-e^{2} \over 1+e\cos \nu (t)}\,\!}$

where a is the orbit's semi-major axis.

In celestial mechanics, Projective anomaly is an angular parameter that defines the position of a body moving along a Keplerian orbit. It is the angle between the direction of periapsis and the current position of the body in the projective space.

The projective anomaly is usually denoted by ${\displaystyle \theta }$ and is usually restricted to the range 0 - 360 degrees (0 - 2 ${\displaystyle \pi }$ radians).

The projective anomaly ${\displaystyle \theta }$ is one of four angular parameters (anomalies) that defines a position along an orbit, the other three being the eccentric anomaly, the true anomaly, and the mean anomaly.

In the projective geometry, circles, ellipses, parabolae, and hyperbolae are treated as the same kind of quadratic curves.

An orbit type is classified by two project parameters ${\displaystyle \alpha }$ and ${\displaystyle \beta }$ as follows,

• circular orbit ${\displaystyle \beta =0}$
• elliptic orbit ${\displaystyle \alpha \beta <1}$
• parabolic orbit ${\displaystyle \alpha \beta =1}$
• hyperbolic orbit ${\displaystyle \alpha \beta >1}$
• linear orbit ${\displaystyle \alpha =\beta }$
• imaginary orbit ${\displaystyle \alpha <\beta }$

where

${\displaystyle \alpha ={\frac {(1+e)(q-p)+{\sqrt {(1+e)^{2}(q+p)^{2}+4e^{2}}}}{2}}}$

${\displaystyle \beta ={\frac {2e}{(1+e)(q+p)+{\sqrt {(1+e)^{2}(q+p)^{2}+4e^{2}}}}}}$

${\displaystyle q=(1-e)a}$

${\displaystyle p={\frac {1}{Q}}={\frac {1}{(1+e)a}}}$

where ${\displaystyle \alpha }$ is semi major axis, ${\displaystyle e}$ is eccentricity, ${\displaystyle q}$ is perihelion distance, and ${\displaystyle Q}$ is aphelion distance.

Position and heliocentric distance of the planet ${\displaystyle x}$, ${\displaystyle y}$ and ${\displaystyle r}$ can be calculated as functions of the projective anomaly ${\displaystyle \theta }$ :

${\displaystyle x={\frac {-\beta +\alpha \cos \theta }{1+\alpha \beta \cos \theta }}}$

${\displaystyle y={\frac {{\sqrt {\alpha ^{2}-\beta ^{2}}}\sin \theta }{1+\alpha \beta \cos \theta }}}$

${\displaystyle r={\frac {\alpha -\beta \cos \theta }{1+\alpha \beta \cos \theta }}}$

The projective anomaly ${\displaystyle \theta }$ can be calculated from the eccentric anomaly ${\displaystyle u}$ as follows,

• Case : ${\displaystyle \alpha \beta <1}$

${\displaystyle \tan {\frac {\theta }{2}}={\sqrt {\frac {1+\alpha \beta }{1-\alpha \beta }}}\tan {\frac {u}{2}}}$

${\displaystyle u-e\sin u=M=\left({\frac {1-\alpha ^{2}\beta ^{2}}{\alpha (1+\beta ^{2})}}\right)^{3/2}k(t-T_{0})}$

• case : ${\displaystyle \alpha \beta =1}$

${\displaystyle {\frac {s^{3}}{3}}+{\frac {\alpha ^{2}-1}{\alpha ^{2}+1}}s={\frac {2k(t-T_{0})}{\sqrt {\alpha (\alpha ^{2}+1)^{3}}}}}$

${\displaystyle s=\tan {\frac {\theta }{2}}}$

• case : ${\displaystyle \alpha \beta >1}$

${\displaystyle \tan {\frac {\theta }{2}}={\sqrt {\frac {\alpha \beta +1}{\alpha \beta -1}}}\tanh {\frac {u}{2}}}$

${\displaystyle e\sinh u-u=M=\left({\frac {\alpha ^{2}\beta ^{2}-1}{\alpha (1+\beta ^{2})}}\right)^{3/2}k(t-T_{0})}$

The above equations are called Kepler's equation.

For arbitrary constant ${\displaystyle \lambda }$, the generalized anomaly ${\displaystyle \Theta }$ is related as

${\displaystyle \tan {\frac {\Theta }{2}}=\lambda \tan {\frac {u}{2}}}$

The eccentric anomaly, the true anomaly, and the projective anomaly are the cases of ${\displaystyle \lambda =1}$, ${\displaystyle \lambda ={\sqrt {\frac {1+e}{1-e}}}}$, ${\displaystyle \lambda ={\sqrt {\frac {1+\alpha \beta }{1-\alpha \beta }}}}$, respectively.

• Sato, I., "A New Anomaly of Keplerian Motion", Astronomical Journal Vol.116, pp. 2038-3039, (1997)

• Two body problem
• Mean anomaly
• Eccentric anomaly
• Kepler's equation
• projective geometry
• Kepler's laws of planetary motion
• Projective anomaly
• Ellipse
• Hyperbola

• Murray, C. D. & Dermott, S. F., 1999, Solar System Dynamics, Cambridge University Press, Cambridge. ISBN 0-521-57597-4
• Plummer, H. C., 1960, An Introductory Treatise on Dynamical Astronomy, Dover Publications, New York. OCLC 1311887 (Reprint of the 1918 Cambridge University Press edition.)

• Federal Aviation Administration - Describing Orbits