Power density

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Power density" – news · newspapers · books · scholar · JSTOR (July 2020) (Learn how and when to remove this message)

Power density is the amount of power (time rate of energy transfer) per unit volume.^[1]It is typically measured in watts per cubic meter (W/m³) and represents how much power is distributed within a given space. In various fields such as physics, engineering, and electronics, power density is used to evaluate the efficiency and performance of devices, systems, or materials by considering how much power they can handle or generate relative to their size or volume.^[2]

In energy transformers including batteries, fuel cells, motors, power supply units, etc., power density refers to a volume, where it is often called volume power density, expressed as W/m³.

In reciprocating internal combustion engines, power density (power per swept volume or brake horsepower per cubic centimetre) is an important metric, based on the internal capacity of the engine, not its external size.

Power density is commonly defined as the converter’s rated (nominal) output power divided by the physical volume it occupies:^[3]

${\displaystyle V_{0}I_{0}/xyz}$

For comparative purposes, the output power denotes the continuous power deliverable under specified worst-case environmental conditions. ^[3]Typical determinants include ambient temperature, maximum permissible case temperature, unit orientation and airflow, operating altitude, and reliability or lifetime targets that may impose derating.^[3]

The converter’s volume can be defined in multiple ways depending on application and construction.^[4] Reported figures may include or exclude elements such as electromagnetic-interference (EMI) filters, thermal management hardware (e.g., fans or heatsinks), protective housing/enclosures, connectors, and input/output energy-storage capacitors, components often required in end products but omitted from modular supply measurements.^[4]

The relevance of power density has gradually increased from the advent of switched-mode power conversion, with efficiency being the primary cause.^[3] Switching converters enabled performance beyond the deterministic limits of linear power supplies, whose efficiencies were largely constrained by input-output voltage ratios and a small set of available topologies.^[3]

Beginning in the early 1990s, efficiency improvements accelerated, driven by the expansion of personal computing and consumer electronics, growth in telecommunications, and rapid progress in semiconductor technology.^[3] As conversion efficiency increased, attainable power density rose in parallel, reflecting the close coupling between these metrics.^[3]

Successive energy crises and the resulting regulatory frameworks elevated efficiency from a desirable attribute to a practical requirement, with emphasis on energy conservation and total cost of ownership across the life cycle of power systems.^[5] This eventually caused high power density to become regarded as a leading benchmark of power-system engineering, being the convergence of efficiency, compactness, and performance in modern power-delivery design.^[5]

This section needs expansion. You can help by adding to it. (July 2015)

• Energy density, energy per unit volume
• Specific energy, energy per unit mass
• Specific absorption rate (SAR)

This engineering-related article is a stub. You can help Wikipedia by expanding it.

• v
• t
• e