Fly line

Fly line is a fishing line used by fly anglers to cast artificial flies using a fly rod. Fly lines evolved from horsehair lines described by Izaak Walton in The Compleat Angler (1653) through the use of silk, braided synthetics to the modern-day plastic-coated lines.

The earliest fly lines were typically of a fixed length of eight to ten feet and constructed of horsehair. Long strands of horsehair from horse tails were woven to construct a tapered line of typically two strands at the tip and some 40 strands at the butt. Fixed length horsehair lines were the norm well into the 17th century and the hair from a stallion was the preferred material.^[1] Until the 19th century, fly lines were being made with woven silk which replaced horsehair as the material of choice. By the 19th century, fly lines were longer and called running lines that were stored on a fly reel and cast through guides on a fly rod.

By the late 19th century, fly lines were still being constructed with silk but were braided instead of woven. Braiding created a hollow core which improved flotation. Nylon, invented by Dupont and in the 1930s found it way into fly line manufacturing in the late 1940s. Braided Nylon fly lines were cheaper than silk but suffered from their tendency to stretch when wet. In the post-WWII era, Dacron also known as polyester, became the material of choice for braided fly lines. Braided Dacron fly lines floated well and were lighter, more durable and cheaper to manufacture than silk lines.

In 1952, the Cortland Line Company pioneered the use of vinyl to coat braided cores creating the first plastic coated fly lines that are the mainstream today. Throughout the last half of the 20th century, plastic fly line technology facilitated all manner of fly line innovation to address fly fishing for cold-water, warm-water and saltwater species globally. The most recent innovation in fly line materials came in 2007 when Scientific Anglers introduced textured fly lines. Texturing the surface of the plastic coated fly lines reduced friction improving casting distance and line pickup.^[2]

Fly lines are designed to float (F) or sink (S). Floating lines generally designed with positive buoyancy for their entire length. Some fly lines have both a sinking section at the tip and a floating running line (F/S). Sinking lines can be fast sinking or slow sinking generally have a specified sink rate in inches per second. Floating fly lines are created by embedding minute air bubbles in the plastic coating around the core. Sinking fly lines or sinking sections of fly lines created by embedding minute particles of tungsten or other heavy metal in the plastic coating.^[3]

In the 1930s, the National Association of Accuracy Casting Competition (NAACC) established size standards for fly lines based on the diameter of the woven silk lines. The standard was alphabetical with A being the largest and I being the smallest. Tapered fly lines were designated with multiple letters, i.e. HDH which indicated it was a double tapered (DT) line.

The advent of lighter Dacron and vinyl coated fly lines rendered the NAACC alphabetic size standard problematic. It was conceived when most all fly lines were braided silk and one manufacturer’s HDH line was similar in performance to another’s. Fly rod manufacturers had confidence in recommending a specific size fly line for their rods and that any silk line with that designation would perform well regardless of brand. However, it was the weight of the fly line that really mattered, not the size and the lighter synthetic lines performed differently than silk lines of the same size. This caused confusion for consumers and fly rod manufacturers. In 1960, after several years of collaboration between casting experts, rod and line manufacturers and industry media, the American Fly Fishing Tackle Association approved a weight standard for fly lines that persists today. The standard establishes a numbering system of fly lines from 1 to 15, with 1 being the lightest. The standard establishes the desired weight in grains or grams for the first thirty feet of fly line minus any level tip.^[5]

Source:^[3]

• Level fly line (L)
• Double Taper fly line (DT)
• Weight Forward Taper fly line (WF)

• Shooting Heads/Shooting Taper (SH/ST)
• Triangle Tapered fly line
• Tenkara

Fly lines are designed for compatibility with fly rods of specific actions and recommended line weights. Dimensions of fly line tapers vary widely to meet the needs of different casting situations, rod types, fly selection and target species. Although there is no industry standard naming convention, most fly line manufacturers use: Taper-weight-buoyancy to identify any given line. Example: WF-5-F would indicate a weight forward taper, a line recommended for a 5 weight rod and a floating line. Some fly lines, especially heavier sinking fly lines and sink-tip line are merely identified by their grain weight, i.e. WF- 150 gr. (grain) - S. . Common fly line terms include:

• Tip - the section of fly line (if any) just in front of the front taper.
• Front taper - the section of fly that tapers from the tip to the beginning of the belly
• Belly — the level section between the front taper and the rear taper
• Running line - the level section of line from the rear taper to the end or butt of the fly line
• Loop - Some modern fly lines have loops built-in to the tip and/or butt to facilitation the connection of leaders and backing
• Sink-tip - A fly line where only the tapered portion of the fly line is designed to sink
• Sink-rate - The nominal rate at which the line will sink in inches per second.
  • Sink-rates are usually expressed as Types 1-6 in either numerals or Roman numerals with the lowest number being the slowest sink rates. However there is no industry standard for fly line sink-rates and one manufacturers rates may be different than another’s for the same type rating.^[7]

(Year founded)

Source:^[8]